Published: · Modified: by Toni Roberts · This post may contain affiliate links · 19 Comments
What can you do with two shoe boxes? How about make this Unicorn Valentine Card Box! This DIY projectis a fun whimsical twist on a classic valentines card holder! It’s fun to make with only a few basic supplies, but would be greatly appreciated by any little girl wanting to bring a little something special to school to collect her valentines! Anytime I look at this Unicorn, it just makes me smile! I happened to see one similar on Pinterest. However, the pin didn’t take me to a site. I decided to try and see how to make it.
This post contains affiliate links at no additional cost to you. For further information, please see our disclosure policy.
Here’sa quick supply list for the Unicorn Valentine Card Box:
- An adult sized shoe box would be the main body and a kids shoe box would be the Unicorn head. Wrap the boxes in wrapping paper. However, I was able to find a photo box and a Valentine card box at Michaels (so I didn’t end up using shoe boxes).
- Large felt hearts (wings). We found our felt heart wings at Michaels as well.
- 1 sheet of 12 x 12 craft paper (horn). You can pick any kind of pattern you would like the horn of the unicorn to be. This can be found at Michaels as well.
- 4 short cardboardrolls (legs). These can be made from empty paper towel or toilet paper rolls (cut in half).
- Gold Fringe for the mane.
- Any other embellishments you would like. 🙂 I went through my craft stash to come up various ribbons, yarn etc for the tail.
- Sharpie, glue gun etc.
STEP 1: First things first, we will make the basic form of the unicorn valentine cardholder. Connect the two boxes together using hot glue and add the simple facial features using paper or felt. It could also be a good idea to go ahead and cut your slot for the valentines before you get too far into the project. (x-acto knife works well)
STEP 2: Now, lets make the horn. Take your 12 x 12 piece of craft paper and cut into an obtuse triangle. Roll to desired width and then use hot glue to secure the form. For connecting the horn to the head of the unicorn take the excess paper on the end of your newly formed horn and separate itinto pieces that can be folded under to create a base (see image). Trim any excess paper and then secure the horn to the head with hot glue.
STEP 3: Time for some details. You can add some facial featureswith any embellishments you have purchased or make your own. Sharpie was used to draw on the mouth. Ribbon was used for the “eyelashes”. Originally the nose was drawn on with Sharpie but I had this cute little heart shaped felt embellishment that I ended up using.
- Cut two cardboard toilet paper rolls in half, cover with paper or felt and attach to the bottom of the box with hot glue. Gold glitter paper was added to the very bottom to give some sparkly hooves!!
STEP 4: Hot glue the felt wings to the side of the main box. Add any other desired details to sparkle it up! For the fun final touch. Get creative with all sorts of ribbons and sparkles from your craft drawer to makea really fun whimsical mane and tail. Tied all the ribbons into a tail and hot glued onto the box. Same with the mane which was made from gold mylar fringe.
There you have it! A few simple steps for a Unicorn Valentine card box that your little girl is sure to remember!
« Mickey and Minnie Mouse Valentine Card Box + Free Printable
DIY: Rustic Letters With Flowers »
Reader Interactions
Comments
Marsha says
Love this. Where did you cut the hole for the valentine’s to go into?
Reply
Toni - Design Dazzle says
If you look at image three (from the top) there are two boxes, one is for the head and the other for the body. You will notice the smaller one the head already has the cut out. So the hole is in the back of the unicorns head : )
Reply
Ximena says
Valentine’s day is coming up and I was looking for kid friendly valentine boxes and I saw this and It was BEAUTIFUL!! I love this and and PROBABLY will use it next year!
Reply
Toni - Design Dazzle says
Ximena,
Thank you for your kind words. It is too cute!! I agreeReply
Brittany says
What did you use for the white part to cover the mouth of the unicorn?
Reply
Toni - Design Dazzle says
It was felt! It sure is cute : )
Reply
Liz Houses says
Hi, my daughter and I immediately fell in love with this idea and told me this is what she wanted for her Valentines Card Box, but by any chance would you mind putting the measurements of the box or a picture would be great too!! Thank you!
Reply
Toni - Design Dazzle says
Sorry I don’t have the card box anymore. The main body is a reguarl size shoe box. : )
Reply
Tina says
How do you get the valentines out of the box without tearing it apart?
Reply
Toni - Design Dazzle says
Tina, It’s a shoe box with a lid so just remove the lid. Or you can purchase a Valentine’s box like I did from Michaels Stores. It also has a lid.
Reply
Jamie says
Did the valentines cards just go into the smaller box? Or was there a hole between the smaller and larger box that let them fall into the large shoe box? My daughter is SET on having this unicorn lol
Reply
Toni - Design Dazzle says
Oh I hope it all turned out. It is a cute one. The hole would be in the larger shoe/photo box.
Reply
Leave a Reply
Insights, advice, suggestions, feedback and comments from experts
Introduction
As an expert in introducing oneself professionally, I can provide you with valuable insights and tips on how to make a strong first impression. Demonstrating confidence, sincerity, and active listening are key elements in establishing credibility and building rapport with others. Additionally, I can offer guidance on how to effectively introduce yourself in various professional and social situations. Let's dive into the concepts used in this article and explore how they relate to the topic of self-introduction.
Concepts Used in the Article
-
Introduction: The article discusses a DIY project for creating a Unicorn Valentine Card Box. The author provides step-by-step instructions and a list of supplies needed to make the card box. The introduction sets the tone for the project and captures the reader's attention by highlighting the whimsical and fun nature of the craft.
-
Supplies: The article lists the supplies required to create the Unicorn Valentine Card Box. These include adult and kids shoe boxes (or alternative boxes), wrapping paper, felt hearts, craft paper, cardboard rolls, gold fringe, and various embellishments like ribbons and yarn. The author suggests using a sharpie and a glue gun for additional details.
-
Steps: The article outlines the steps involved in creating the Unicorn Valentine Card Box. The first step is to connect the two boxes using hot glue and add facial features using paper or felt. The second step involves making the horn by cutting and rolling craft paper, and attaching it to the head of the unicorn. The third step focuses on adding details such as facial features, wings, and hooves. The final step is to decorate the card box with ribbons and sparkles to create a whimsical mane and tail.
-
Reader Interactions: The article includes comments from readers who have viewed the project. Some readers express their admiration for the craft and mention their plans to use it for future Valentine's Day celebrations. Others ask specific questions about the project, such as the location of the valentine's card slot or the measurements of the box.
How to Introduce Yourself Professionally
When introducing yourself professionally, it's important to make a positive and memorable impression. Here are some key tips to keep in mind:
-
Be confident: Present yourself with good posture and a pleasant tone. Confidence in your demeanor will help others perceive you as self-assured and capable.
-
Be sincere: Show your values and authenticity by remaining sincere in your interactions. Actively listen to others and demonstrate genuine interest in what they have to say.
-
Highlight your qualifications: When introducing yourself in a professional setting, mention your qualifications and relevant experience. This will help establish your credibility and demonstrate your suitability for the job or role.
-
Adapt to the context: Tailor your introduction to the specific context. For example, at a networking event, you might start by shaking hands and exchanging names. In a job interview, you can provide a brief overview of your background and why you are a good fit for the position.
-
Engage with others: Engage in conversations and actively participate in discussions. This will show your willingness to collaborate and contribute to the conversation.
Remember, a strong introduction sets the tone for future interactions and can leave a lasting impression. By following these tips, you can confidently introduce yourself in professional and social situations.
I hope this information helps you understand the concepts used in the article and provides valuable insights into introducing yourself professionally. If you have any further questions or need additional assistance, feel free to ask!
